Pay in installments of $6.92 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 3 - Jul 8
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
automatic gear bicycle Early Rider Belter 16 Auto | 16" kids bike automatic gearsThe world's best selling belt drive bike The Belter 16 Auto features a lightweight aluminum frame with updated geometry for greater stability and agile handling. The low maintenance 8mm belt drivetrain pairs with a Sturmey Archer 2 speed automatic rear hub, delivering smooth, gear free shifting that adapts to the rider's pace. Sliding dropouts, sealed bearing 14" wheels, and Schwalbe Billy Bonkers 2. 0" tires ensure a durable, confident ride. Reduced
The world's best selling belt drive bike...
The Belter 16 Auto features a lightweight aluminum frame with updated geometry for greater stability and agile handling. The low-maintenance 8mm belt drivetrain pairs with a Sturmey Archer 2-speed automatic rear hub, delivering smooth, gear-free shifting that adapts to the rider's pace. Sliding dropouts, sealed bearing 14" wheels, and Schwalbe Billy Bonkers 2.0" tires ensure a durable, confident ride. Reduced-diameter grips and kid-optimized gearing make this the ideal next step for young urban riders.
ASSEMBLY INSTRUCTIONS:
Your bike will arrive carefully packaged and boxed with both wheels attached. The handlebar will be zip tied to the top tube, simply remove the bars and all packaging and attach to the stem. Then simply add the pedals. Please retain your manual.
[Left column]
INSIDE LEG
45CM
FRAME
HAND BRUSHED AL6061, FORGED DROP OUTS
FORK
HAND BRUSHED AL6061, FORGED DROP OUTS
STEERER TUBE
AL6061
CRANKS
CRUX CNC'D AL6061, 90MM
PEDALS
RESIN PLATFORM, STUDDED, CARTRIDGE BEARING (upgrade since image above)
BOTTOM BRACKET
CRUX EXTERNAL CUP, SEALED CARTRIDGE BEARING
RIMS
16 x 20H, DOUBLE WALLED AL6061
REAR HUB
STURMEY ARCHER 2-SPEED AUTOMATIC HUB
FRONT HUB
CARTRIDGE BEARING, CNC'D AL6061
AXLES
AL6061
BELT
EARLY RIDER 830MM x 10.0P x 8MM WIDTH
FRONT SPROCKET
CNC'D AL6061, 32T, AL6061 AXLE, DUAL GUARD
*Every effort has been made to ensure accuracy throughout this website. However, Early Rider reserves the right to change prices and bike specifications without prior notice*
CLICK HERE TO VIEW THE USER MANUAL
[Right column]
WEIGHT
6.4KGS WITHOUT PEDALS
REAR SPROCKET
CNC"D AL6061, 18T, DUAL GUARD
BRAKES
TEKTRO 837AL
LEVERS
TEKTRO SHORT REACH JL350
FRONT TYRE
SCHWALBE BILLY BONKERS 16 x 2.0" 60TPI WB
REAR TYRE
SCHWALBE BILLY BONKERS 16 x 2.0" 60TPI WB
HEADSET
1 1/8” CONVENTIONAL, EXTERNAL CUP
STEM
FORGED AL6061, 35MM REACH
BARS
500MM DOUBLE BUTTED AL6061, 25MM RISE, 19MM GRIP AREA
GRIPS
ER 90MM SOFT TOUCH MUSHROOM
SEAT POST
AL6061, 25.4MM, 195MM
SADDLE
ER WING COMBO BLACK
SEAT CLAMP
ER BOLT, 28.6MM
[Table]
| STANDOVER HEIGHT | 45CM |
| FRAME | HAND BRUSHED AL6061, FORGED DROP OUTS |
| FORK | HAND BRUSHED AL6061, FORGED DROP OUTS |
| STEERER | TUBE AL6061 |
| CRANKS | CRUX CNC'D AL6061, 90MM |
| PEDALS | RESIN PLATFORM, STUDDED, CARTRIDGE BEARING |
| BOTTOM BRACKET | CRUX EXTERNAL CUP, SEALED CARTRIDGE BEARING |
| RIMS | 16 x 20H, DOUBLE WALLED AL6061 |
| REAR HUB | STURMEY ARCHER 2-SPEED AUTOMATIC REAR HUB |
| FRONT HUB | CNC'D AL6061, CARTRIDGE BEARING |
| AXLES | AL6061 |
| BELT | EARLY RIDER 830MM x 10.0P x 8MM WIDTH |
| FRONT SPROCKET | CNC'D AL6061, 32T, AL6061 AXLE, DUAL GUARD |
| WEIGHT | 6.4KGS WITHOUT PEDALS |
| REAR SPROCKET | CNC"D AL7075, 18T |
| BRAKES | TEKTRO 837AL, 102MM ARMS |
| LEVERS | TEKTRO SHORT REACH JL350 |
| FRONT TYRE | SCWHALBE BILLY BONKERS 16x2.0 60TPI WB |
| REAR TYRE | SCWHALBE BILLY BONKERS 16x2.0 60TPI WB |
| HEADSET | 1 1/8” CONVENTIONAL, EXTERNAL CUP |
| STEM | FORGED AL6061, 35MM REACH |
| BARS | 500mm DOUBLE BUTTED AL6061, 25MM RISE, 19MM GRIP AREA |
| GRIPS | ER 19MM SOFT TOUCH MUSHROOM 100MM |
| SEAT POST | AL6061, 25.4MM x 195MM |
| SADDLE | ER WING COMBO BLACK |
| SEAT CLAMP | ER BOLT, 28.6MM |
| SPEC NOTICE | Every effort has been made to ensure accuracy throughout this website. However, Early Rider reserves the right to change prices and bike specifications without prior notice |
[Table spec]
| A | Wheelbase | 750mm |
| B | Head Angle | 67° |
| C | Seat Tube Length | 210mm |
| D | Chainstay Length | 287mm |
| E | Seat Tube Angle | 72° |
| F | Standover Height | 410mm |
| G | Top Tube Length | 399.17mm |
| H | Head Tube Length | 90mm |
| I | Stack |
351.5mm |
| J | Reach |
284.96mm |
| K | Fork Length | 272mm |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 621 reviews
Sort
Product Reviews
★★★★★ 3
Gets the job done. Just barely.
Style: Dual Arms, Size: 17"-33"
It holds up my monitor, but just barely, and without any confidence or finesse.
I had to move on from my previous arm mounts, the HUANUO. Those claimed to hold up to a 30 inch monitor and support 20 pounds. When I upgraded to a Samsung Odyssey Neo G8, it could no longer perform its duties. The gas shock was up to task, but the final adjustment piece that tilts it up or down was a hard down.
Queue this piece of hardware! 22 pounds is more than 20, and 32 is more than 30. This time I'm not even technically out of spec. The clamping force seems more than adequate to hold this to my desk. I will, at this point, basically walk you through how I feel about this mount, based on the order of installation instructions.
The way it goes together means that you will have to pull your desk out to maneuver the clamp in place before snugging it back up to the wall, a point in the HUANO's favor since it had a clever leveraging mechanism that lets you hang it with your desk still against the wall.
The way cords route through the arms close to the base means that you have to route them before you put the swivel arm on the base. This is because it has a screw at the front and back to secure the cover, and the angle/height are such that you cannot fit a screwdriver into the bottom one after you mount it. While not impossible to do with it installed, it would involve a right-angle screwdriver. They provide one of those, but the screwdriver bit of it is on the long shaft, and you would need it on the short shaft to get to that screw.
The way the swivel arms mount on the base is less than ideal as well. The arm slips onto a robust metal hub, and you tighten a screw that pushes against a plastic tab that makes it harder or easier to move. The location for this screw faces the wall. So you must turn the arm at an extreme angle to make it tighter or looser. Not a big deal, but noticeable.
Top arms go on smoothly, cable routing is simple and easy. No complaints about this section.
Mounting the monitor. The instructions are to mount the plate to the monitor, and then slide the plate onto the holder and secure it with the screw. I did this for neither of my monitors, although I tried it for my second. My big monitor went smoothly by mounting the bracket ahead of time and just forcing the arm down into position while my monitor rested on my desk. I tried this for my second bracket, but it was much harder to do with the monitor in a vertical orientation. So then I tried to do it the way the instructions wanted. I would have been able to do so, but my monitor has the mounting location set into the back of the monitor. This means that you can't mount it flush and then slide it on because you don't have clearance. So I tried to use the spacers. The spacers aren't spacious enough and the screws bottomed before snugging. While I'm not saying that solution wouldn't have technically worked, I instead reverted back to mounting the bracket first. This time I laid my monitor flat on the desk, reduced the tension in the shock greatly, and placed it into position that way.
At the end when it's complete and setup? It works. It will hold the G8. But just barely. The G8 uses an adapter to go from the monitor mounting points to VESA 100. This adapter sticks out quite a bit from the monitor, which means the weight is further away from the mounting point. Getting the tilt adjustment to hold involved a bigger allen wrench and cranking it further than it seems like it was meant to go. It groaned, but it held. It wants to dip if you mess with it, so I crank it again. Will it one day totally fail on me and point my monitor at my desk? Maybe. But it works on day 1, so that's a start.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 29, 2024
★★★★★ 5
The Best Cable Management Solution for IT Work — Reusable, Reliable, and Professional
Size: 150Pk - 8" x 1/2", Style: Cord Wrap Cable Ties, Color: Black and Gray
TL;DR: I’ve been using these VELCRO Brand cable ties for years as an IT field tech. They hold tight, are endlessly reusable, and keep cables tidy. Great for both home and professional setups.
Full Review:
As an IT field technician, I’ve tried countless ways to keep cables organized, and these VELCRO Brand cable ties are simply the best. They’re reusable, strong, and easy to reposition — ideal for network racks, AV installs, or just cleaning up cords around the house.
Functionality:
Top-notch. The hook-and-loop material is aggressive enough to hold firmly, but not so sticky that it clings to everything else in your tool bag. They wrap cleanly, stay put, and release easily when you need to re-route cables. They’re reliable enough for professional jobs and flexible enough for home use.
Storage Capacity:
Each strap holds more than you’d expect — I rarely need to link two together. They handle thick cable bundles or power cords just fine on their own. And when I do need more length, it’s easy to join a second strap for a larger wrap.
The two-color mix (black and gray) is great for keeping different cable types separated — for instance, network vs. power. The thin profile also helps keep bundles neat and professional-looking.
These have earned me plenty of compliments from higher-ups for clean cable runs and well-organized setups. Once you switch to these, you’ll never want to deal with cutting zip ties again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 12, 2025
★★★★★ 5
VELCRO Ties Are the Standard to Rely On
Size: 150Pk - 8" x 1/2", Style: Cord Wrap Cable Ties, Color: Black and Gray
I am a big fan of VELCRO brand products because of their quality and utility. I have used their rolls of Velcro hook and loop tape as well as their little patches, and I became a brand loyalist. Yes, there are many other manufacturers, but these are certainly as good as it gets. This product is your very basic, very thin, and very copious supply (for my neighbors in Rio Linda - that means plenty of them). You get two big spools of these little eight (8) inch ties that are adhesive throughout their length - that means you can tie the smallest cables to anything almost up to their full length. If you need a longer wrap - use more than one and just extend the length by piggy backing them. The real advantage of this bulk package is that you are not tempted to save some for later - you have enough to use as many as you like and can happily go tie crazy on all your cords! It's VELCRO party time. We live in an electronic age, and I have a lot of more pricey hook-and-loop specialty ties, and I try to keep a few back as spares. Forget that - with these little ties, I can actually use them and do what I need to get those tangled cords in shape. O.K. maybe I am a geek, but I cook my chicken - dead already, and I believe in independent segregated wiring and not tripping over things or spending time untangling messes when I need to move gear. These big rolls will make your life easier - I use them to attach notes to little jars or vials - to tie two gloves together when I am not wearing them - and other uses even cutting them into smaller pieces. That's one of the advantages of these bulk spools - lots of supply. Yes, the individual ties are dinky thin little things, but they hold very well (why you buy genuine VELCRO) and you don't feel stupid using them up on anything you feel like. They are expendable, and that adds to their ultimate utility. Darned useful product. Buy it - use it; enjoy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 17, 2024
★★★★★ 5
Computers, electronics cabling? You NEED these!
Size: 100Pk - 6” x ½”, Style: Cord Wrap Cable Ties, Color: Black
If you do any cabling, be it TV or computer or anything else, these ARE worth there weight in gold. Seriously! They'll keep your cable runs, extension cords, etc in a nice neat easy to work with bundle that you can have out of the way. Adhesion is very good also which is also important. Just the right size for most applications and if you need something large they make them to fit your needs. Cable management has always been a pet peeve of mine and makes a difference that not only shows but makes future work and maintenance much easier. Whenever I see a rat's nest cluster of wires I always know it means shoddy workmanship!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 9, 2026
★★★★★ 4
Very Effective, but Not the Instructions
Size: 150Pk - 8" x 1/2", Style: Cord Wrap Cable Ties, Color: Black and Gray
These work very well, but when you remove them from the box, you see two donuts, one grey, one black, of 75 tightly wrapped cable ties each. So far, so good.
First deficiency: The "how to use" pictures---three of them---are tiny light line drawings in 7/16" x 7/16" boxes. If you don't have a 400-power microscope, maybe a magnifying glass will do. Maybe Velcro---a "name" brand that should know better---thinks that the use of these devices is obvious. Well, "obvious" is obvious only when it's obvious, and that can vary from person to person. They should assume nothing.
Second deficiency: Before trying (and, one hopes, succeeding) at using these ties, one must determine exactly now to remove the first tie from the outside of either donut. Obvious? No, not really, because, as it turned out, it requires some effort to remove the first one---the placement and circumstances of which do not at all (not on my set of these, anyway) suggest in any concrete way which one should be taken first. No one wants to tear up a couple of ties just to figure out how not to tear up ties by removing them incorrectly or out of order.
The punishment here is four stars that could have been five.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026